Products

Vaporesso’s XROS 3 Mini uses refillable pods with a 2 mL e‑liquid capacity. These pods are compatible across the XROS series.

The XROS 3 Mini includes a high-density 1,000 mAh battery. Vaporesso claims "up to 48 hours" of use per full charge. In real-world use:

• Light-to-moderate vapers often get around 24 hours of continuous use.
• Heavy users typically see 5–10 hours before needing a recharge.

Yes! The XROS 3 Mini supports the full Vaporesso XROS pod lineup including 0.6 Ω, 0.8 Ω, 1.0 Ω, and 1.2 Ω options.

Refilling is easy:

1. Pop off the magnetic mouthpiece to reveal the fill port.
2. Insert your e-liquid nozzle into the port (usually highlighted in red).
3. Fill carefully, then snap the mouthpiece back on.
4. Wait ~5 minutes before vaping to allow coil saturation.

• 0.6 Ω mesh pods pair best with high‑VG e‑liquids (70% VG or more) — great for RDL/clouds.
• 0.8–1.2 Ω pods work well with 50/50 VG/PG blends or nicotine salts, ideal for MTL vaping.

The Vaporesso XROS 3 features a dual draw design, offering both MTL (mouth-to-lung) and RDL (restricted direct-lung) vaping. Its adjustable airflow slider lets you fine-tune your draw tightness — tighter for classic MTL, looser for RDL cloud production.

The XROS 3 is compatible with all Vaporesso XROS pods, including 0.6 Ω, 0.8 Ω, 1.0 Ω, and 1.2 Ω mesh pods.

The XROS 3 is powered by a 1,000 mAh high-density battery, delivering up to 48 hours on light use thanks to Axon chipset and Pulse Mode, but realistically 24 hours for average users.

Heavy users can expect 5–14 hours, depending on pod choice and airflow.

It recharges via USB-C (1A) in approximately 35–45 minutes.

Yes, the XROS 3 is beginner-friendly. It offers both draw & button activation, a leak-resistant pod design (SSS Tech), simple top-fill, LED battery indicators, and a compact form factor, ideal for new or transitioning vapers.

• Use high-VG e-liquids (70% VG+) with the 0.6 Ω mesh pod for RDL/clouds.
• Use 50/50 VG/PG blends or nicotine salts in 0.8–1.2 Ω pods for classic MTL draws.

The XROS 3 Nano features a compact square body, includes a lanyard clip, and offers adjustable airflow. The XROS 3 Mini is slimmer and more minimalist, without a lanyard or airflow control.

The Nano is compatible with all Vaporesso XROS pods: 0.6 Ω, 0.8 Ω, 1.0 Ω, and 1.2 Ω mesh pods.

Yes. The XROS 3 Nano includes a sliding airflow control switch so you can fine-tune your draw tightness.

No. The XROS 3 Nano is draw-activated only, offering a simple and intuitive vaping experience.

Use higher‑VG e-liquid (70 %+ VG) with 0.6 Ω pods for restricted direct-lung. Use 50/50 VG/PG blends or nicotine salt juices with 0.8 Ω and above for mouth-to-lung vaping.

The Drag S2 offers three power modes:

• Smart Mode – Automatically selects the ideal wattage based on coil detection, perfect for beginners.
• RBA Mode – Manual wattage control from 5–60 W, great for experienced users seeking precision.
• Eco Mode – Limits output to conserve battery life, delivering about 10% more usage per charge.

The Drag S2 features a built-in 2,500 mAh internal battery and fast charges via USB-C at 5 V/2 A.

A full charge takes about 90 minutes and yields approximately 345 puffs when using a 0.6 Ω coil at 20 W.

The Drag S2 uses VooPoo’s PnP X pods and coils (incompatible with older PnP versions):

• DTL coils: 0.2 Ω (40–60 W) and 0.3 Ω (32–40 W)
• MTL/MTL-RDL coils: 0.3 Ω (MTL/RDL) and 0.6 Ω (MTL) – availability varies by region

PnP X pods feature a top-airflow system that balances pressure and resists leaking. The mesh coils use thermo-stable cotton and a dual L-shaped anti-leak structure, lasting up to ~100 mL of e-liquid before performance dips.

The PnP X pod has a built-in airflow control ring with scale markings. Rotate the ring to dial in draw tightness—from tight MTL pulls to looser DTL inhales.

The Drag S2 uses the fire and up/down buttons for control:

• Fire ×5 – Power on/off
• Fire + Up – Lock/unlock device
• Fire + Down – Reset puff counter
• Fire ×3 – Cycle through Smart, RBA, and Eco modes
• Up + Down – Display puff statistics and history

The kit includes the SMOK RPM 5 device, one RPM 5 pod, an RPM 5 RGC mesh coil (0.12 Ω), a refillable MTL pod, and a USB‑C charging cable.

• RPM 5 RGC Mesh 0.12 Ω – Best for DTL vaping, great vapor and flavor.
• Also compatible with RPM & Nord coils such as 0.16 Ω RGC, 0.4 Ω RPM, 0.8 Ω MTL pick based on your draw style.

The RPM 5 uses a dual sliding airflow switch built into the pod. Slide it fully open for airy DTL inhales, or close it for tighter, restricted draws.

The SMOK RPM 5 is powered by a 2,000 mAh built-in battery and supports up to 80 W output (ideal range is 60–70 W with RGC coil). It charges quickly via USB‑C.

1. Slide open the silicone plug on the pod.
2. Fill with e‑liquid to the max line.
3. Seal the plug tightly to prevent leaks.
4. To change coils, remove the pod, pull out the old coil, insert a new one, and let it prime before vaping.

The Aegis Solo 3 Kit delivers up to 100W of adjustable wattage for powerful and customized vaping performance.

Yes, it features GeekVape’s Tri-Proof tech for water, dust, and shock resistance, making it ideal for rugged everyday use.

The Aegis Solo 3 Kit features a built-in 4000mAh battery and supports USB-C fast charging for all-day performance.

The GeekVape Aegis Solo 3 comes with the Z Sub-Ohm 2021 Tank, which is compatible with GeekVape Z Series Coils. Supported coil options include the Z0.15Ω, Z0.2Ω, Z0.25Ω Dual, and Z0.4Ω mesh coils—ideal for delivering dense vapor and rich flavor.

The included tank has a 5.5mL e-liquid capacity, allowing for extended vaping sessions without frequent refills.